Note: Install the entire repair kit when performing repair work. Apply a thin layer of mounting paste "G 052 150 A2" to the brake cylinder, piston and seals
I 1. Bolt 30 Nm; 2. Protective cap. Insert into brake caliper; 3. Guide fingers. Pass through the cuff; 4. Protective cap. Install on the bleed nipple; 5. Bleed nipple. Before screwing in, apply a thin layer of mounting paste "G 052150 A2". 15 Nm; 6. Brake caliper housing; 7. Fastening spring. Observe the installation position; 8. Protective cap. Do not damage the piston during installation. Lubricate with mounting paste "G 052 150 A2"; 9. Piston. Apply a thin layer of mounting paste "G 052 150 A2" to the piston in advance. Diameter 57 mm; 10. Lip seal. Lubricate with mounting paste "G 052 150 A2"; 11. Brake mechanism support. It is prohibited to loosen the bolts (4 pcs.) securing the brake pads to the brake bracket; 12. Bolt. 196 Nm
The original source of the article can be found on the website AudiManual