Table of contents: Removal ↓ Installation ↓
Fuel tank components on models with ADR engine coding
- 1. Fuel supply pipe
- 2. Hose leading to the carbon filter
- 3. Return pipeline
- 4. Bypass tube
- 5. Filler neck tube
- 6. Insert
- 7. Clamp
- 8. Fuel tank
- 9. Banjo connection bolt
- 10. Fastening ring
- 11. Fuel level sensor
- 12. Fuel pump
Fuel tank components on models with engine coding AAD
- 1. Banjo connection bolt
- 2. Copper washers
- 3. Fastening ring
- 4. Fuel level sensor
- 5. Sealing ring
- 6. Clamp
- 7. Pressure chamber
- 8. Fuel pump
- 9. Return pipeline
- 10. Fuel tank
- 11. Damper pads
- 12. Filler neck hose
- 13. Clamp
- 14. Insert
- 15. Filler neck tube
- 16. Bypass tube
- 17. Return pipeline
- 18. Protective hose
- 19. Ventilation valve
- 20. Ventilation tube
- 21. Fuel supply pipe
Removal
1. Disconnect the connection connector and hoses from the pump/fuel level sensor.
2. Place a jack under the fuel tank.
3. Disconnect the filler hose from the fuel tank.
4. Remove the fuel tank mounting strip nuts and remove the fuel tank.
Installation
Installation is carried out in the reverse order of removal.