Timing belt tensioner
Withdrawal
1. Disconnect the negative battery cable.
2. Remove drive belts.
3. Set the N1 piston to TDC and remove the timing belt top cover.
4. Loosen the tensioner nut and loosen the belt. Turn the nut.
5. Remove tensioner.
Installation
Install the tensioner in reverse order and tension the belt.
Camshaft sprocket
Withdrawal
1. Disconnect the negative battery cable.
2. Remove drive belts.
3. Set the N1 piston to TDC and remove the timing belt top cover.
4. Remove tensioner and belt.
5. Remove the crankshaft sprocket bolt and remove the sprocket.
Installation
Installation is carried out in the reverse order of removal.
Crankshaft sprocket
Withdrawal
1. Remove the timing belt.
2. Remove the crankshaft sprocket bolt and remove the sprocket.
Installation
Installation is carried out in the reverse order of removal.
1. Insert the crankshaft sprocket bolt.
2. Tighten the bolt to the required tightening torque.
3. Tighten the bolt to the required angle.
Intermediate shaft sprocket
Withdrawal
1. Remove the timing belt.
2. Stop the sprocket and remove the bolt. Take off the star.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments