Models without airbag
Withdrawal
1. Set the front wheels straight ahead and lock the steering column.
2. Remove the panel in the center of the steering wheel.
3. Loosen the fixing nut, mark the position of the steering wheel on the steering column shaft and remove the steering wheel.
Installation
Installation is carried out in the reverse order of removal.
Models with airbag
Warning: Take precautions when handling the air bag module.
Withdrawal
1. Remove the air bag module.
2. Set the front wheels straight ahead and lock the steering column.
3. Loosen the two fixing screws and remove the upper casing of the steering column.
4. Disconnect the airbag contact module connector.
5. Loosen the fixing nut, mark the position of the steering wheel on the steering column shaft and remove the steering wheel.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments