Table of contents: Removal ↓ Installation ↓
Removal
1. Remove the steering wheel.
2. Remove the cover, unscrew the mounting nuts and remove the combination switch wires.
3. Remove the instrument panel and shelf.
4. Disconnect the connection connector (indicated by the arrow) from the ignition switch and remove the wires from the steering column.
5. Bend back the trim panel and mark the installation position of the steering column universal joint in relation to the steering gear shaft. Then unscrew the pinch bolt (indicated by the arrow) and a nut.
6. Remove the ignition switch housing mounting bolt.
7. Loosen the nuts and remove the steering column mounting bolts (indicated by arrows). Remove the steering column.
8. Remove the casing, unscrew the upper mounting nuts (two nuts are indicated by arrows) and remove the rack from the car.
Installation
Installation is carried out in the reverse order of removal.