Withdrawal
Ignition/steering lock mechanism
1. Remove the steering wheel.
2. Remove the cover, unscrew the fixing nuts and remove the wires of the combined switches.
3. Remove the instrument panel and shelf.
4. Disconnect the connector (indicated by an arrow) from the ignition switch and remove the wires from the steering column.
5. Unscrew the fixing bolt of the lock casing.
6. Turn off fixing nuts, get bolts and get a column from a fixing bracket. Remove the lock.
7. To replace the lock drum, drill a hole at the point shown in the pictures (left - for models Audi 100, right - Audi A6) to gain access to the locking latch. Insert the key into the lock slot, press the latch and remove the drum.
Ignition switch
Loosen the fixing screws and remove the switch from the lock cover.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments