Withdrawal
Remove headlight.
Pull out the headlight adjustment plug.
Remove the adjusting motor from the holder. To do this, turn the motor on the right headlight to the left, turn the left motor to the right.
AUDI 90/Coupe: forcefully remove the motor from the mount.
AUDI 80: Raise the motor, insert a thin screwdriver into the hole and press the lock in the direction of the drive shaft while pulling the motor back.
Installation
Lift up the cover retaining bracket on the headlight and remove the cover behind the headlight.
Insert the motor into the holder. In this case, the reflector should be held.
Attention: Do not grasp the inside of the reflector.
Rotate the setting motor to its original position.
Press and close the lid.
Install headlight.
Connect plug.
Visitor comments