Examination
Check fuse #3 in the relay box. Remove the lower trim in the left footwell. Disconnect plug from brake light switch.
Connect both brake light switch wires with an auxiliary wire. If at the same time the brake lights do not light up, replace the switch or check the wiring according to the diagram.
Replacement/Adjustment
Pull out the brake light switch and remove the latch from the pedal box.
Press the brake pedal by hand.
Push in the switch on the pedal unit as far as it will go.
Pull the brake pedal to the stop by hand. Stoplight switch adjusted.
Connect plug.
Install the bottom trim.
Visitor comments