Note: The switch does not have mechanical coding, so after replacing it, you can continue to use the old keys. After replacing the switch, there is also no need to adapt the immobilizer.
1. Remove the instrument cluster (see Section 15) and the upper trim under the steering column (see Chapter 10).
2. Remove the bolts (arrows in the illustration) and remove the switch (1) from the instrument panel.
16.2. Fastening the E415 switch panel.
3. Disconnect the switch connectors, turn the panel over, and remove the screws (arrows in the illustration) switch mounts (1) and remove it from the frame (2).
16.3. Fastening of switch E415.
4. Installation is carried out in reverse order.