10.1. Removing the windshield washer nozzle.
2. To remove the rear window washer fluid nozzle, remove the lever cover (1 in the illustration) and carefully pull the nozzle (2) out of the connecting tube (arrow).
10.2. Removing the rear window washer nozzle.
3. To remove the neck (2 in the illustration) unscrew the bolt (1) securing the washer fluid reservoir, remove the front right wheel arch liner (see Chapter 10), and then remove the filler neck hose from the reservoir (A) and from the body opening (B).
10.3. Removing the washer fluid reservoir neck.
When installing, check and, if necessary, replace the sealing ring (3).
4. To remove the low washer fluid level sensor, remove the front right wheel arch liner (see Chapter 10), disconnect the connector (1 in the illustration) and pull the sensor (2) out of the tank, collecting the leaking liquid.
10.4. Removing the low washer fluid level sensor.
When installing, check and, if necessary, replace the sealing ring (3).
5. To remove the washer fluid pump, remove the front right wheel arch liner (see Chapter 10), disconnect the connector (2 in the illustration) sensor, pull the pump (5) out of the tank (1) and move the pump forward. Disconnect the hoses (3 and 6) from the pump and disconnect the connector (4).
10.5. Removing the washer fluid pump.
When installing, check and, if necessary, replace the gasket (7).
6. The following describes how to remove the washer fluid reservoir.
7. Remove the front right wheel arch liner (see Chapter 10).
8. Pull out the hose (1 in the illustration) neck from the tank, disconnect the connector (3) and remove the connector (2) from the holder.
10.8. Hose and connectors.
On models with headlight washers, additionally pull out the connector (4).
9. Release the wiring from the holders (1 and 3 in the illustration, only on models with a tire inflation pressure monitoring system) and unscrew the bolts (2 and 4).
10.9. Fastening of the washer fluid reservoir.
Disconnect the hoses from the pump, collecting the leaking liquid, and the reservoir.
10. Installation is carried out in reverse order.
The original version is on the portal AudiManual