Note: When replacing lamps, follow the instructions given before the subsection "Replacing headlight bulbs".
1. To remove most lights, use a screwdriver to press on the latch (1 in the illustration), press the flashlight (2) outward and disconnect the connector (3).
7.1. Removing the light in the trunk lid.
After this, you can replace the lamp. In some cases, access to the lamp requires removing the rear cover from the flashlight.
2. The following describes the process of removing the ceiling light.
3. Open the glasses case (1 in the illustration) and carefully release and remove the central cover (2 and 3) of the lamp.
7.3. Removing the central cover.
4. Release the contour pad (1 in the illustration) lamp.
7.4. Removing the contour overlay.
5. Remove the bolts (see illustration), tilt the light down, remove it from the ceiling and disconnect the connectors.
7.5. Light fixture mounting bolts.
The original article is located on the online resource: AUDIMANUAL