Carefully! Risk of damage to the gearbox. Do not start the engine or tow the vehicle with the self-locking center differential removed or without transmission oil.
Center differential housing 1. Seal ring: replace; lubricate with transmission oil; 2. Central differential; 3. Ball bearing of the central differential; 4. Retaining ring of ball bearing shaft with flange; 5. Retaining ring: for flanged shaft; 6. Rear shaft ball bearing with flange; 7. Threaded plug for the oil filler hole of the transfer case: 35 Nm; replace; 8. Center differential housing; 9. Rear shaft seal with flange; 10. Rear shaft with flange: when replacing the rear shaft with flange, also replace the shaft seal; 11. Bolt: replace
Center differential housing tightening torque and sequence
Tighten the center differential cover screws in 3 steps.
- 1. Pre-tighten bolts -1 - and -2- to a torque of 3 Nm.
- 2. Tighten the bolts in sequence -1...6- to a torque of 8 Nm.
- 3. Remove the bolts in the sequence -1...6-.
Visitor comments