Bleeding the hydraulic steering system (Audi A6 C5)

Bleeding the hydraulic steering system must be done if air has entered the system, for example when replacing a hose.

Check the fluid level and top it up if necessary.

Raise the front of the vehicle enough to lift the wheels off the ground.

With the engine off, turn the steering wheel ten times from lock to lock.

Check the fluid level and top it up if necessary.

Lower the car to the ground and start the engine. Turn the steering wheel ten times from lock to lock.

Check the fluid level and top it up if necessary.

Note: If there is a small amount of air left in the hydraulic steering system, it will be completely removed after the vehicle has run for 10-20 km.

[The original version is on the portal: audimanual.ru]