Withdrawal
Remove the center console. Open the front ashtray and remove the protective frame 2 (pic. 12.77) from the six fastening clips, starting from the bottom.
Pic. 12.77. Front center console
1 - front center console,
2 - protective frame,
3 - mounting clips,
4 - fixing clips,
5 - plug for the switch strip,
6 - bolts, 5 Nm,
7 - plug,
8 - nut,
9 - mounting bracket
Remove the radio.
Remove the air conditioner or heater control panel.
Remove the front ashtray. Remove the plug for the control bar 5 (pic. 12.77) with four fixing clips 4.
Remove four bolts 6 (pic. 12.77).
Remove plug 7 (pic. 12.77). Remove the side protective cover and unscrew the nut 8 (pic. 12.77).
Pull the center console on the driver's side from the mounting bolts, and remove it downwards.
Installation
Insert the center console from below, while the mounting brackets 9 (pic. 12.77) fastened with fasteners. From the side, slide the console onto the mounting bolts.
Further installation is carried out in the reverse order of removal.
Visitor comments