21.0. Headlight washer jets:
1 - jet
2 - bolt. Tightening torque - 2.5 Nm
3 - jet holder
4 - bolt. Tightening torque - 2.5 Nm
X - to the washer reservoir
Withdrawal
1. Remove the front bumper (see relevant chapter).
2. Lift the plug on the bumper and release it from the mount (see arrow in illustration).
21.2. Lift the plug on the bumper and release it from the mount (see arrow)
3. Disconnect the hose 4 for the supply of washing liquid by pressing on the leashes (see illustration).
21.3. Disconnect the hose 4 for the supply of washing liquid by pressing on the leashes
4. Unscrew the headlight washer jet holder bolt (if provided).
5. Unscrew bolts 1 and 2 and remove jet 3 (see illustration 21.3).
Installation
The headlight washer jets are installed in the reverse order of removal.
Visitor comments