Remove the rubber seal from the hood upholstery panel.
Remove the left plastic wiper motor panel.
Pic. 16–77. Bonnet upholstery panel and washer nozzles: 1 - screw; 2 - bolt; 3 - hood upholstery panel; 4 - washer nozzles; 5 - hose; 6 - holders
Unscrew two screws 1 (pic. 16–77) and bolt 2; pulling forward, remove the hood upholstery panel from the two holders 6.
Disconnect the hose 5 from the washer nozzles 4 and remove the hood upholstery panel from the vehicle.
Pic. 16–80. Using a screwdriver to pry out the latch when removing the washer nozzle
Use the blade of a small screwdriver on the back of the nozzle to press the latch and remove the nozzle from the grille of the hood panel (pic. 16–80).
Installation
Installation is carried out in the reverse order of removal.
Visitor comments