Withdrawal
Remove the wiper arm. Detach washer hose -3-. If fitted, unplug connectors -4- and -5- for heated injectors. Loosen hose clamp -b- using hose clamp pliers -VAG 1921- and detach drain hose at fairing grille. Remove rubber seal -1- for fairing grille. To prevent splitting of the fairing grille -2- when removing it, lightly grease the transition point between the windshield and the fairing grille with soapy water and remove the fairing grille, starting from the edge of the glass, in a vertical direction.
Remove fairing grille -2-. Release washer hose. Release the electrical cable to the respective nozzle. Disconnect the washer pipe from the appropriate nozzle. Using a screwdriver, press back both retaining plates -arrow 1- and turn the injector upwards out of the cowling grille -arrow 2-.
Installation
Install in reverse order, paying attention to the following: The water hose must engage with a clearly audible click on the nozzle connector. Adjust wiper arm.
Visitor comments