Withdrawal
Remove the front bumper. Place a rag to protect the bumper and hold the nozzle with pliers. Remove jet cover from bumper towards top and carefully remove fasteners -arrows-.
Detach water hose -1- from injector -4-. Remove screws -1- and -3- and remove injector.
Installation
Install in reverse order, taking into account that all hose connections must be secured with clamps of the appropriate series.
Install hose clamp using hose clamp pliers -VAG 1275-. Install the front bumper. Tightening torque: Nozzle to bumper: 2.5 Nm.
Nozzle setting
The headlight cleaner jets are factory set and do not need to be adjusted after installation.
Visitor comments