Withdrawal
1. Remove the power steering reservoir cap (see arrow in illustration).
22.1. Remove the power steering reservoir cap (see arrow)
2. Unscrew the bolt (see arrow in illustration).
22.2. unscrew the bolt (see arrow)
3. Remove the front left wheel and fender liner.
4. Disconnect plug 2, and then unscrew the two lower bolts securing the washer reservoir (see arrows in illustration).
22.4. Disconnect plug 2, and then unscrew the two lower bolts securing the washer reservoir (see arrows)
5. Remove washer reservoir 1 from the engine compartment by lowering it down (see illustration 22.4).
6. Disconnect plug 1 from the washer pump and carefully remove pump 2 from the reservoir (see illustration).
22.6. Disconnect the plug 1 from the washer pump and carefully remove the pump 2 from the reservoir
Installation
Installation of the tank and washer pump is carried out in the reverse order of removal.
Visitor comments