Withdrawal
1. Turn away bolts of fastening -1- and remove a broad tank of a cooling liquid (A) (wrench 10 mm) and take it up.
2. Remove the 2 cross-head screws -2- and remove the adsorber (Gas engine) (IN) or fuel filter (diesel engine) and lift it up. C - washer reservoir.
3. Loosen 2 nuts (arrows in the illustration).
4. Remove washer reservoir (A) up from the engine compartment.
5. Disconnect the plug connections at the water pump.
6. Drain the water from the tank and remove the pump from the side of the tank.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments