Withdrawal
1. Remove an upholstery of a door, the corresponding chapter see.
2. Raise the door glass up, release the plug 2 of the central lock and its wire 4 from the holders on the door upholstery (see illustration).
13.2. Release plug 2 and its wire 4 from the holders on the door trim:
1 - central lock switch
3 - fixing leashes of the switch
3. Disconnect rod 3 (see arrow in illustration).
13.3. Disconnect rod 3 (see arrow)
4. Unscrew the bolts 1 of the lock with a socket wrench and remove the lock 2 by passing it between the supporting bracket and the door wall (see illustration 13.3).
Installation
The lock is installed in the reverse order of its removal.
Visitor comments