Fastening the cable to the throttle sector (aDR engine)
Removal
1. Remove the retaining clip and disconnect the cable from the throttle shaft.
2. Remove the cable sheath from the mounting bracket.
3. Remove the trim panel under the steering column.
4. Disconnect the cable from the accelerator pedal and remove the cable.
Installation
Installation is carried out in the reverse order of removal.
Adjustment
Models with manual transmission
Adjust the position of the metal clamp (indicated by the arrow) on the cable sheath so that when the accelerator pedal is fully depressed, the throttle valve is fully open.
[The original source of the article can be found on the website: audimanual]