| System type | |
| Models with engine coding AAE |
Bosch Mono-Motronic
|
| Power supply system | |
| Fuel pump type |
Electric pump, installed in the fuel tank
|
| Pump power |
1400 cm³/min. (operating voltage 12.5 volts)
|
| Fuel pressure |
0.8 – 1.2 Bar
|
| Idle speed |
750 – 1000 rpm (not regulated)
|
| Maximum engine speed |
6400 rpm (electronic adjustment)
|
| Injector resistance |
1.2 – 1.6 Ohm at 15°C
|
| Recommended fuel type | |
| Minimum octane number of gasoline: | |
| – 74 kW engines |
91 RON
|
Tightening torques, Nm
| Fastening the CO sensor tube to the intake manifold |
20
|
| Damper mounting nut |
10
|
| Fuel Pump Banjo Bolt |
20
|
| Fuel pump wire terminal nuts: | |
| – M5 |
4
|
| – M6 |
7
|
| Injector housing/air temperature sensor mounting screw |
5
|
| Intake Manifold Heater Mounting Screws |
10
|
| Intake Manifold Mounting Bolts |
25
|
| Air duct mounting screw |
10
|
| Fastening the throttle body to the intake manifold |
13
|
| Throttle body mounting screws |
10
|
| Fastening the upper section of the throttle body |
6
|
| Throttle Positioning Module Mounting Screws |
6
|
| Fastening the warm air pipe to the exhaust manifold |
20
|