- Bolts of fastening of a head of cylinders (on a cold engine): 1st reception: 7.5; Step 2: turn 180°.
- Nuts of hairpins of fastening of a cover of a head of cylinders: 1,0.
- Bolt of fastening of a gear pulley of a cranked shaft: 8,0.
- Bolt of fastening of a gear pulley of a camshaft: 5,0.
- Bolts of fastening of covers of radical bearings 6,5.
- Connecting rod cap bolt nut: 1st move: 3.0; Tighten the 1st step by 90°.
- Flywheel mounting bolt 7.5 (pre-apply a special locking adhesive to the thread).
- Bolt of fastening of the water pump 1,0.
- Bolts of fastening of a transmission to the block of the engine: 5,5.
- Nuts and bolts for mounting pillows and engine mount brackets: 4.5.
- Bolt of fastening of a cover of the oil pump: 1,0.
- Spark plugs: 2.5
Visitor comments