Remove the stretch. Drain the coolant.
Disconnect the crankcase ventilation hose -2- by pressing the release buttons. Remove the air duct hose by loosening the hose clamp -1-.
Unscrew the bolt and nut -arrows-. Remove the coolant hose by loosening the hose clamp -3-. -Pos. 1,2 - do not take into account.
Unscrew the bolts -2- of the exhaust gas recirculation system pipe. -Pos. 1- do not take into account.
Unscrew the bolts -1- of the exhaust gas recirculation system pipe. -Pos. 2- do not take into account.
Disconnect el. plug connections -2,3,4- and release the wires. -Pos. 1- do not take into account.
Remove the coolant hose by loosening the hose clamp -2-. Unscrew bolts -1.3- and remove the exhaust gas recirculation radiator.
Installation
Install in reverse order, note the following. Replace gaskets and seals. ring. Secure all hose connections with hose clamps of the appropriate series. Install the rear right coolant pipe. Connect the air hose using threaded clamps. Install a stretcher. Install the air housing. filter. Fill with coolant.
Visitor comments