1. Door seal; 2. Rear sill trim. Removal: heat the threshold trim with a hairdryer and remove upwards. Installation: The lower beam in the gluing area must be free of dust and grease. Heat the gluing surface of the spar with a hairdryer to approximately 40°C. Remove the protective film from the adhesive tape. Insert the sill trim with the centering pins into the sill and press firmly, starting from the front towards the back; 3. Front sill trim. The procedure for removing and installing is similar to the work with the rear sill trim; 4. Adhesive tape. Before installation, remove the protective film
The threshold trim is secured to the threshold with adhesive tape. Dismantling without damage is not possible.
Visitor comments