Table of contents: Front door slit trim ↓ Rear door slit trim ↓
The bonding surfaces on the body must be free of dust and grease. Clean the bonding surfaces with a cleaning agent "D 009 401 04". Heat the bonding surfaces with an industrial hair dryer to approx. 40°C. After assembly, press the overlay with a roller.
Front door slit trim
To remove, detach the upper trim "1", starting from the back forward and remove it from the door flange in a downward direction. Clean the glued surface from adhesive residue. Remove the protective film from the double-sided adhesive tape. Place the trim from below on the door flange, after centering it, correctly position it and press it into the clip "2" at the top.
Rear door slit trim
Removal is similar to the operations with the front door.
[Material republished from the website: audimanual]