Withdrawal
1. Remove the generator (see relevant chapter).
2. Unscrew the bolts (see arrows in illustration) and remove the alternator bracket.
12.2. Unscrew the bolts (see arrows) and remove the alternator bracket
3. Install a container to collect the oil drained from the radiator.
4. Disconnect the coolant hose from the radiator by removing the clamp 1 (see illustration).
12.4. Disconnect the coolant hose from the radiator by removing the clamp 1
5. Unscrew the bolts (see arrows in illustration 12.4) fasteners and remove the oil cooler.
Installation
The oil cooler is installed in the reverse order of removal.
6. The tightening torque of the oil cooler bolts is 10 Nm.
7. The tightening torque of the M8 bolts for fastening the generator bracket is 22 Nm, the M10 bolts - 45 Nm.
Visitor comments