Table of contents: Removal ↓ Installation ↓
Fuel tank components
- 1. Fuel supply pipe
- 2. Ventilation hose
- 3. Ventilation hose leading to the carbon filter
- 4. Ventilation valve
- 5. Fastening
- 6. Return pipeline
- 7. Jellied
- 8. Bypass tube
- 9. Filler neck tube
- 10. Insert
- 11. Clamp
- 12. Hose
- 13. Return pipe inside the fuel tank
- 14. Damper pads
- 15. Banjo connection bolt
- 16. Sealing washers
- 17. Fastening ring
- 18. Fuel level sensor
- 19. Sealing ring
- 20. Fuel pump
- 21. Fuel tank
Removal
1. The fuel pump and fuel level sensor are installed in the fuel tank.
2. Remove the panel on top of the fuel tank.
3. Disconnect the pump/sensor connection connector.
4. Disconnect the fuel and vent hoses and mark them.
5. Unscrew the retaining ring and remove the pump/sensor.
6. Disconnect the hoses inside the pump and the connection connector.
7. Turn the pump counterclockwise approximately 15mm and remove it from the mount.
Installation
Installation is carried out in the reverse order of removal.