Table of contents: Models with a body type "sedan" ↓ Models with a body type "station… ↓
Models with a body type "sedan"
Models with external antenna
1. Remove the trim panel.
2. Unscrew the fastening nuts and remove the antenna. Disconnect the connection connector.
3. Installation is carried out in the reverse order of removal.
Models with an antenna installed in the rear window
1. Remove the rear shelf.
2. Remove the left rear pillar trim panel.
3. Loosen the mounting screws and remove the antenna amplifier.
4. Installation is carried out in the reverse order of removal.
Models with a body type "station wagon"
Audi 100 Models
1. Remove the trunk light.
2. Disconnect the connection connector, unscrew the fastening nut and remove the antenna.
3. Installation is carried out in the reverse order of removal.
Audi A6 Models
1. Unscrew the antenna and remove the cap.
2. Remove the trunk light.
3. Remove the lamp and disconnect the connection connector (arrow), unscrew the fastening nut and remove the antenna.
4. Installation is carried out in the reverse order of removal.
[The original source of the article can be found on the website «AUDImanual»]