Table of contents: Vacuum pump ↓ Throttle actuator ↓ System switch ↓ Clutch and brake pedal switches ↓
The cruise control system consists of an electronic control unit, a vacuum pump and a drive.
Vacuum pump
1. Disconnect the connection connector and vacuum hose from the pump. Unscrew the mounting nuts and remove the pump.
2. Installation is carried out in the reverse order of removal.
Throttle actuator
1. Disconnect the drive ball joint from the throttle valve.
2. Disconnect the vacuum hose, unscrew the mounting nut and remove the drive.
3. Installation is carried out in the reverse order of removal.
System switch
Look subsection 13.1.5
Clutch and brake pedal switches
1. Remove the shelf and trim panel.
2. Disconnect the vacuum hose and unscrew the switch.
3. Installation is carried out in the reverse order of removal.
(The original version of the article is posted on the website: AUDIMANUAL.ru)