Sealing flanges and dual mass flywheel:
1. Sealing cuff, replace, do not lubricate with oil
2. The sealing flange on the belt pulley side must be installed on the centering bushings
3. Cylinder block
4. Dual mass flywheel, for removal and installation fix with support "33865"
5. Bolt. Replace, 60 Nm + tighten by +90°
6. The intermediate sheet must not be damaged/bent during installation work; it must be installed on centering bushings
7. Bolt, 15 Nm
8. Sealing flange with cuff on the gearbox side with cylinder block seal, install using sealant