V-ribbed belt drive:
1. V-ribbed belt. Check the degree of wear. Do not bend. Before removing, mark the direction of rotation with chalk or a felt-tip pen. Installing a belt that has already been used in the opposite direction of rotation can lead to its destruction. When installing the belt, make sure that it is in the correct position on the pulleys.
2. Vibration damper with V-ribbed belt pulley
3. Bolt. Replace; use only original bolts, 10 Nm + tighten by + 90°
4. Tensioner for V-ribbed belt. Use a spanner to loosen the poly V-belt, secure the poly V-belt tensioner with the locking pin -T10060 A-
5. Bolt, 23 Nm
6. Bracket for accessories
7. Sleeve
8. Bolt, 23 Nm
9. Generator
10. Bolt, 45 Nm. when screwing, use thread varnish. Follow tightening sequence
11. Sleeve, 2 pieces
12. Air conditioning compressor
13. Bolt, 25 Nm
Visitor comments