Location at the checkpoint
- -Arrow A-. MCP 0V1/2
- -Arrow B-. Letter designation and production date
- -Arrow C-. Letter designation and production date on the gearbox housing at the bottom (not available in all versions)
Stepped gearbox 0B1 or 0B2 -arrow-
- 0B1 - gearbox version - for vehicles with front-wheel drive
- 0B2 - gearbox version, all-wheel drive (with shaft with flange for cardan shaft)
Letter designation -arrow A- and gearbox production date -arrow B-
Additional data is due to production. The letter code of the gearbox is also given on the vehicle’s nameplate.
Rear final drive OVS
Compliance with markings on the final drive
Main gear OVS -arrow 1 - and OAR
Letter designation and date of manufacture -arrow 2-
Main gear OVS -arrow- and 0AR
Note: The rear final drive housing is always marked "OAR". Characteristic difference between final drives "OBC and "OAR" - modified crankcase. Another distinguishing feature is the position of the threaded holes -arrow- for attaching the cross member of the rear final drive. At the main gear "OBC" There are 4 threaded holes -arrows- for fastening the cross member in the final drive housing. In addition, an additional threaded hole for attaching the final drive to the subframe is located under the flange/propshaft.
Letter designation and date of manufacture of the rear final drive
Example
Other data can be ignored.
Letter designations
MCP | 6-speed gearbox 0B2, all-wheel drive | ||
Letter designation | KWT | KXR | LHU |
Engine | 2.0L TDI-120 kW, 2.0L TDI-125 kW | 2.0 l TFSI -132 kW, 2.0 l TFSI -155 kW | 2.0 l TDI -100 kW, 2.0 l T01-105 kW |
Refill volume | 4.8 l |
MCP | 6-speed gearbox 0B2, all-wheel drive | ||
Letter designation | LRZ | LSA | LSB |
Engine | 2.0 l TDI -100 kW, 2.0 l TDI -105 kW | 2.0L TDI-120kW, 2.0L TDI-125kW | 2.0 L TFSI-132 kW, 2.0 L TFSI-132 kW, 2.0 L TFSI -155 kW |
Refill volume | 4.8 l |
For a more detailed description, see 6-gearbox 0B1.
Rear final drive OBD
Location on rear final drive
Main gear OBD, letter designation and production date -arrow-
- -Arrow A-. Final drive 0BD with part number (example: 0BD 500 043A)
- -Arrow B-. Letter designation "JTN"
- -Arrow C-. Rear final drive design data
Example
Other data can be ignored.
Note: If the rear main gear is being replaced, then it is necessary to take into account not only the letter designation of the main gear, but also the PR number, as well as the letter designation of the vehicle’s engine in the Electronic Parts Catalog. This is the only way to ensure perfect compliance.
Visitor comments