Table of contents: Removal window switches "E52" / "E54" ↓ Installation ↓ Removal the rear door lock switch… ↓ Installation ↓ Removal the doorway light bulb… ↓ Installation ↓ Removal door limit switches "F10" /… ↓ Removal the rear threshold light… ↓ Installation ↓
I 1. Rear left window switch "E52"; 2. Rear right door opening illumination lamp "L110"; 3. Rear left door internal lock switch "E273"; 4. Window lift switch on the rear right door "E54"; 5. Rear right door internal lock switch "E274"; 6. Rear right door opening illumination lamp "L111"; 7. The rear right door limit switch "F11" is built into the door lock. If faulty, it cannot be replaced separately; 8. Signal lamp in the rear right door "W38". 12 V, 3 W; 9. Ceiling light for rear right threshold illumination "W34". 12 V, 3 W; 10. The rear left door limit switch "F10" is built into the door lock. If faulty, it cannot be replaced separately from the door lock; 11. Ceiling light for rear left threshold illumination "W33". 12 V, 3 W; 12. Signal lamp in the rear left door "W37". 12 V, 3 W
Removal window switches "E52" / "E54"
Turn off the ignition. Remove the armrest. Carefully unlock the "arrow" latches with a small screwdriver. Press the window lift switch "1" out of the switch socket "2".
Installation
Installation in reverse order: press the window lift switch until it locks into place. Install the armrest.
Removal the rear door lock switch from the passenger compartment "E273" / "E274" (center keys, lock)
Switch off ignition. Remove rear door trim. Disconnect electrical plug connection "1". Unlock "arrow" latches and remove interior door lock switch "2" from door trim.
Installation
Installation in reverse order: insert the interior lock switch into the mount, make sure it is fixed. Install the rear door trim.
Removal the doorway light bulb "L110" / "L111"
Switch off the ignition. Remove the rear door trim. Disconnect the electrical plug connection "1". Turn the lamp socket "2" to the left and remove it through the door release handle.
Installation
Installation in reverse order: insert the door light bulb into the hole and snap it into place. Install the rear door trim.
Removal door limit switches "F10" / "F11"
The door limit switch is located in the door lock and cannot be replaced separately if it malfunctions.
Removal the rear threshold light "W33" / "W34" and a signal light in the rear door "W37" / "W38"
Switch off the ignition. Press in the locking lug "1" with a flat-head screwdriver and remove, by prying it off with a lever, the door lock button illumination lamp or, respectively, the threshold illumination lamp "2". Disconnect the electrical plug connection "3".
Door signal light: carefully pry the cover over the "arrow" lamp.
Threshold illumination lamp: unlock the "arrow" clamps and remove the cover "1" above the lamp.
Remove lamp "1" on the back of the door signal light and/or threshold light from socket "2".
Installation
Installation in reverse order: Put on the cover of the door signal light and/or the sill light. Insert the door signal light and/or the sill light into the hole and snap it on the other side.