Table of contents: Cigarette lighter ↓ Radio plate ↓
Cigarette lighter
The 12V socket located in the cigarette lighter socket can be used to connect additional electrical appliances.
Using the cigarette lighter
- To access the cigarette lighter, press the ashtray bar.
- The cigarette lighter is turned on by pressing the socket.
- Wait until the cartridge is ejected.
- After this, immediately remove the cigarette lighter from the socket.
- Light a cigarette from the hot heating coil of the cigarette lighter.
- Install the cigarette lighter into the socket.
Using the socket
- To access the cigarette lighter, press the ashtray bar.
- Remove the cigarette lighter.
- Insert the electrical appliance plug into the cigarette lighter socket.
The standard 12 V socket located in the cigarette lighter socket can be used to connect additional electrical appliances with a power consumption of no more than 100 W.
Attention. The cigarette lighter works even when the ignition is off, i.e. after the ignition key has been removed from the lock. Therefore, never leave children unattended in the car - fire hazard!
Caution: Only use suitable plugs to avoid damaging the sockets.
Note: Remember that when the engine is not running and electrical consumers are on, the battery is discharged.
Radio plate
The radio is located under the plate.
- To access the radio, press the plate.
- To close, pull the plate down.
The presence of the plate depends on the configuration.
For a description of how to use the Audi radio system, please refer to the radio operating instructions.
The article was copied from the website: audimanual.ru