Withdrawal
Each section of the exhaust system can be removed separately from the rest.
Fastening of a reception pipe of an exhaust system
Downpipe (including catalytic converter on models with 1Z and AHU engine)
1. Remove the protective shield from the bottom of the engine and the cross member at the rear of the gearbox.
2. Unscrew the mounting bolts and fasteners.
3. Unscrew the fixing nuts and disconnect the pipe from the exhaust manifold.
4. Turn off fixing bolts and remove a reception pipe.
Catalytic converter (except models with 1Z and AHU engine)
5. Disconnect the downpipe from the catalytic converter.
6. Unscrew the fixing bolts and remove the catalytic converter.
Intermediate pipe
7. Remove the mounting bolts and disconnect the pipe from the catalytic converter and muffler.
8. Remove the intermediate pipe.
Exhaust pipe and muffler
9. Unscrew the fixing bolts and the intermediate pipe.
10. Remove muffler and pipe from mountings.
Heat shields
11. To remove the screens, unscrew the fixing screws.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments