Accelerator cable (AAS)
Withdrawal
1. Remove the trim panel and disconnect the cable from the pedal.
2. In an impellent compartment remove a fixing clip and disconnect a cable from the lever.
3. Remove the cable from the car.
Installation and adjustment
1. Installation is carried out in the reverse order of removal. Adjust the cable tension so that the throttle lever touches the stop when the accelerator pedal is depressed.
Accelerator cable with mechanical adjustment (AAS engine)
Withdrawal
1. Turn the adjusting knob all the way counterclockwise.
2. Disconnect the cable from the lever and remove it from the vehicle.
Installation
Installation is carried out in the reverse order of removal.
Accelerator cable (except AAS engines)
Withdrawal
1. Remove trim panel.
2. Disconnect the cable from the pedal.
3. Remove the nut, remove the washer and disconnect the cable from the pedal position sensor. Remove the rope.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments