Table of contents: Removal ↓ Installation ↓
Removal
Audi 100 Models
1. Remove the radiator grille and fog lights.
2. Loosen the bumper mounting bolts, release the latches and remove the bumper.
Audi A6 Models
1. Release the retaining clips and remove the radiator grilles.
2. Loosen the mounting bolts.
3. Release the retaining clips and remove the bumper.
4. Replace the bumper mounts if necessary. To replace the bumper mount, unscrew the mounting bolts (A). The bushing (B) is used to adjust the bumper installation height.
Installation
Installation is carried out in the reverse order of removal.
(This article was previously published on the resource «AUDIMANUAL.RU»)