Withdrawal
Remove heat shield on left side of fuel tank -arrows-.
Unscrew nuts -arrows- and remove heat shield -2-. Disconnect the additional muffler from both left-hand mounting loops. Remove heat shield -1-. Reinstall the additional muffler. Fasten the muffler immediately, do not leave it hanging, risk of damage to the connecting element.
Install the receiver under the bottom of the car. Remove fuel lines -3- and -4- by pressing release button. Remove nut -5- on bracket. Disconnect the clamp and lower the filter slightly. Remove the retainer -2- and remove the control valve with the lines connected. Reinstall fuel lines from old to new fuel filter. Porous fuel lines must be replaced.
Installation
Install in reverse order, taking into account the following: use clamps of the appropriate series to fasten all hose connections. Fill the new fuel filter with clean diesel fuel to start the engine faster. When installing the control valve, pay attention to the seal. O-ring in the filter housing. Attach the fastener carefully. Flow direction marked with arrows (do not confuse connections). Start the engine and visually check the fuel system for leaks. Tightening torque: Filter bracket nut: 8 Nm.
Visitor comments