Withdrawal
Remove heat shield on left side of fuel tank -arrows-. Unscrew nuts -arrows- and remove heat shield -2-. Disconnect the additional muffler from both left-hand mounting loops. Remove heat shield -1-. Reinstall the additional muffler. Fasten the muffler immediately, do not leave it hanging - risk of damage to the connecting element. Install the receiver under the bottom of the car. Clamp off fuel supply line -4- with hose clamp -3094-. Remove fuel lines -2...5- by pressing release buttons. Remove bolt -1- and remove filter housing.
Installation
Installation in reverse order. Use clamps of the appropriate series to fasten all hose connections. Fill the new filter with clean diesel fuel. This will start the engine faster. Start the engine and visually check the fuel system for leaks. Tightening torque: Filter housing bolt to bracket: 8 Nm.
Visitor comments