Fuel filter (until 04.2002):
1. Bolt. 8 Nm
2. Fuel filter with seals control valve ring. The direction of fuel flow is marked with an arrow. Do not interchange connections, remove water or replace according to the service plan
3. Fuel supply line from the fuel tank
4. Fuel return line to fuel tank
5. Adjusting valve. Installation position: Arrow pointing towards fuel tank. When replacing the filter, remove the retainer and remove the control valve with the fuel lines attached. When installing, pay attention to the seal. ring in the filter housing at temperatures below +15°C: the channel to the filter is open at temperatures above +46°C: the channel to the filter is closed
6. Return fuel line from the engine
7. Fuel supply line to the engine
8. Latches
9. Fuel filter bracket
10. Bolt. 10 Nm
Visitor comments