Table of contents: Front and rear doors ↓ Tailgate ↓
Front and rear doors
1. The side door trim details are shown in the illustrations.
15.1a. Front door trim installation details:
1 - Pocket;
2 - Pocket lock washer;
3 - Washer;
4 - Pocket bolt, 2 Nm;
5 - Armrest;
6 - Window lifter control switch support;
7, 11, 16 - Bolt, 2.5 Nm;
8 - Insert;
9 - Driver's seat memory module;
10 - Trim panel overlay;
12 - Door trim panel;
13 - Panel retainer 12;
14 - Armrest bolt, 1.2 Nm;
15 - Handle bolt 19, 1.2 Nm;
17 - Tailgate and fuel filler flap release buttons;
18 - Keycap/Key Support 17;
19 - Inner door release handle;
20 - Function key "Lane assist";
21 - Key support 20;
22 - Overlay (on models without key 20);
23 - Single lock key;
24 - Module support 9;
25 - Overlay (on models without module 9);
26 - Window lifter control switches;
27 - Rearview mirror adjustment switch;
28 - Lock washer of lining 29;
29 - Cover for the Bose audio system.
15.1b. Rear Door Trim Installation Details:
1 - Pocket;
2 - Pocket lock washer;
3 - Armrest;
4 - Window lifter control switch;
5 - Support for switch 4/ashtray;
6 - Ashtrays;
7 - Trim panel overlay;
8 - Bolt, 2.5 Nm;
9 - Rear door trim panel;
10 - Panel retainer 9;
11 - Armrest bolt, 2.5 Nm;
13 - Handle bolt 13, 1.2 Nm;
14, 17 - Bolt, 2.5 Nm;
15 - Overlay;
16 - Inner handle;
17 - Handle bolt 16, 2.5 Nm;
18 - Handle cover 16;
19 - Lock washer of lining 20;
20 - Cover for the Bose audio system.
Below is a description of trim removal using the front door as an example. For the right door, the steps are similar.
2. Turn off the ignition and remove the key.
3. Carefully remove the overlay (1 in the illustration) from behind (A) and then pull it out in the direction of the arrow (B).
15.3. Removing the trim panel cover.
4. On the driver's door with a thin screwdriver (3 in the illustration) carefully pry up and remove the switch cover (2) in the direction of the arrow.
15.4. Removing the lining and insert.
Disconnect the switch connector and remove the insert (1).
5. Unscrew the bolts on the driver's door (see illustration).
15.5. Driver's door trim fasteners.
6. On the passenger door, insert a 4mm Allen key into the hole on the back of the handle (2 in the illustration), press down the retaining tab (3) of the cover (1) and remove the cover.
15.6. Removing the passenger door handle cover.
7. Remove the bolts on the passenger door (see illustration).
15.7. Fasteners for passenger door trim.
8. Press the trim panel (1 in illustration 15.8a) wedge, inserting it next to the clamps (see illustration 15.8b).
15.8a. Separating the trim from the door.
15.8b. Trim panel fasteners.
9. Separate the cable (3 in the illustration) inner handle from the support bracket (2), and then unhook the end of the cable (1) from the handle.
15.9. Separating the cable from the inner release handle.
10. Disconnect the connector (1 in the illustration) door control unit and remove the trim panel.
15.10. Front door control unit connector.
11. Installation is carried out in reverse order.
Tailgate
12. The installation details of the interior trim panels of the rear door are shown in the illustration.
15.12. Details of installation of interior trim panels of the rear door:
1 - Central top panel;
2 - Top left panel;
3, 15, 21 - Bolt, 1.5 Nm;
4 - Bottom panel;
5, 12 - Tail light covers;
6, 10 - Lighting fixtures;
7 - Cover of the manual release mechanism of the rear lid;
8 - Lock cover;
9 - Bolts, 1.5 Nm: two bolts are accessible after removing the warning triangle, and two more are located behind covers 5 and 12;
11 - Tailgate closing button;
13 - Retainer, 6 pcs., in the bottom panel;
14 - Upper right panel;
16 - Retainer, 2 pcs., in the upper right panel;
17 - Retainer, 5 pcs., in the central upper panel;
18 - Retainer, 2 pcs., in the upper left panel;
19 - Retainer;
20 - Sunshade support;
22 - Support cover 20.
13. If equipped with a sunshade, remove the sunshade support cover from the center top panel, unscrew the bolt and remove the sunshade support.
14. Remove (release from the clamps) the center top panel, then both side top panels.
15. Remove the left and, if present, right lamp (1 in the illustration) in the tailgate.
15.15. Removing the lower trim panel of the tailgate.
If present, remove the tailgate closing button (2). Disconnect the electrical wiring connectors and use wedges to remove the rear combination light covers. Remove the bolts (4), open the cover (5) of the warning triangle, remove the triangle and remove the two bolts (6) located behind it. Remove the remaining bolts (3) and release the lower panel from the holders.
16. Installation is carried out in reverse order. Replace damaged fasteners.
(Text provided by the online resource: audimanual.ru)