12.1. Interior rearview mirror installation details:
1 - Interior rearview mirror;
2 - Retaining spring;
3 - Light and rain sensor;
4, 6 - Upper pads;
5 - Sensor holder 3;
7 - Electrical wiring;
8 - Bottom cover.
2. Pry up and remove the cover (1 in the illustration).
12.2. Removing the lining.
3. Release the wiring from the holder and disconnect the connector (2 in the illustration), turn the mirror on the base (1) counterclockwise until it stops and remove it.
12.3. Removing the mirror.
4. To install, position the mirror at a 30° angle to its final position and rotate it. Secure the wiring and trim.