Withdrawal
To remove the interior rear view mirror, angle it downwards in the direction of the arrow from the base of the holder. The retainers of the clamping springs come out of the grooves.
Installation
Attach mirror 1 (pic. 12.69), rotated 60°-90°, into place, arrow A, and turn, arrows B, until the fixing springs engage in the grooves. Depending on the design, it is necessary to press the glass of the mirror away from the spherical head. For wringing, a stronger force is needed so that the clamping springs enter the grooves of the spherical head.
Differences for an auto-dimming mirror
Remove the electrical connector clamp cover.
Remove the electrical connector from the clamp and disconnect it. When installing the mirror, do not use the clamp cover to rotate the mirror.
Insert the electrical connector and attach the clamp cover.
Visitor comments