The glass cleaning and washing system only works when the ignition is on. Heating of jets, if available, turns on automatically when the ignition is switched on. In frost, before turning on the wipers, check if the brushes are frozen.
- 1 - single stroke of the brushes. To turn on the wiper once, push the lever down
- 0 - disabled
- 2 - interval brush stroke
- 3 - normal mode
- 4 - accelerated mode
- 5 - automatic operation of the cleaner and washer
When the switch lever is pressed towards the steering wheel, the washer and windshield wiper operate. When the headlights are on and the lever is held in this position, the headlight cleaner/washer operates.
- A - interval mode adjustment
Rear window cleaner/washer
Switching on of a cleaner and a washer of back glass is also carried out by a stalk switch. To do this, you need to push it forward. The rear window wiper and washer switch has two positions. In position 1, the interval brush stroke mode is activated. The interval is approximately 6 seconds. To turn off the interval mode, the lever must be returned to its original position. In position 2, the lever should be held as needed, the cleaner and washer will work simultaneously. When released, the wiper brush will continue to operate for approximately four seconds.
Visitor comments