Open the hood.
Use a screwdriver to turn the safety pin located on the bar by 90°.
Press the bar down and slide forward the direction indicator housing.
Turn the lamp socket to the left and remove it.
To replace a burned-out lamp, push it slightly into the bracket, turn to the left and remove; push the new bulb in slightly and turn to the right.
Insert the cartridge and turn it all the way to the right.
Insert the turn signal housing into the guide holes and slide it back until you can hear the locking moment of the bar (check the strength of the fixation by hand).
By turning the safety pin located on the bar by 90°, fix the turn signal housing.
Visitor comments