Headlights
Withdrawal
1. Remove the turn signal.
2. Loosen the fixing screw and remove the trim panel.
3. Loosen the fixing screws (indicated by arrows) and remove the headlight.
4. Rotate the governor motor and disconnect the ball joint.
Installation
Installation is carried out in the reverse order of removal.
Front direction indicator
Withdrawal
1. Release the mounting clip and remove the lamp.
2. Disconnect the connector.
Installation
Installation is carried out in the reverse order of removal.
Front fog lights
1. Remove the radiator grilles.
2. Loosen the fixing screws and remove the lamp.
3. Installation is carried out in the reverse order of removal.
Front side turn signal
1. Slide the lamp back, release the front mounting latch and remove the lamp.
2. Installation is carried out in the reverse order of removal.
Rear block headlight
The block headlight is located on the body.
Withdrawal
1. Rotate latch (arrow) counterclockwise and remove the bulb holder.
2. Unscrew the fixing nuts and remove the fixing plate, then change the headlamp.
Installation
Installation is carried out in the reverse order of removal.
Block headlight
The headlamp is located on the trunk lid/tailgate.
Withdrawal
1. Remove trim panel.
2. Remove the license plate.
3. Loosen the fixing screws (indicated by arrows) and outer trim panel. Do not forget that glue is also used to attach the panel.
4. Unscrew the fixing nuts and remove the headlamp.
Installation
Installation is carried out in the reverse order of removal.
Top brake light
Remove trim panel. Unscrew the mounting screws or release the latches and remove the lamp.
License plate light
1. Loosen the fixing screws and remove the diffuser.
2. Remove the lamp and disconnect the connection connector.
3. Installation is carried out in the reverse order of removal.
Visitor comments