Cylinder head:
1. Cylinder head. There should be no oil or grease on the mounting surface to the camshaft housing. After replacement, replace the coolant and oil
2. Bolt, 20 Nm
3. Engine suspension eye
4. Hydraulic compensator. Mark the mounting position for reinstallation, lubricate the working surface with oil
5. Locking bracket, check the reliability of the fastening, not supplied separately
6. Valve lever with roller. Mark the installation position for reinstallation, check the roller bearings for ease of rotation, lubricate the working surface with oil, fix with a safety bracket "pos. 5" on the hydraulic compensator "pos. 4"
7. Mesh oil filter, installed on the cylinder head. Replace
8. Bolt, 20 Nm
9. Camshaft housing
10. Bolt. Replace, follow the sequence when unscrewing
11. Engine suspension eye
12. Bolt. Replace, follow the sequence when unscrewing
13. Cylinder head gasket. Replace. Installation position: the part number points to the cylinder head and should be read on the intake side. After replacement, replace the coolant and oil.