Oil filter holder:
1. Cover, tighten to 25 Nm
2. O-ring, replace
3. Remove the oil filter insert from the cover; when replacing the filter, replace the seal. rings, observe installation position, observe replacement intervals
4. O-ring, replace
5. Cuff, replace
6. Oil pressure pipe connection to turbocharger, tighten to 25 Nm
7. Oil pressure line to turbocharger, tighten to 22 Nm
8. Oil pressure switch -F1-, 0.7 bar. brown, tighten to 20 Nm
9. 14 Nm + 1/4 turn, replace, insert upper left and lower right bolts first, then cross-tighten all 4 bolts
10. Gasket, replace
11. Threaded plug. 25 Nm
12. Gasket, replace
13. Screw plug 15 Nm
14. Oil filter holder
15. Gasket, replace
Visitor comments